A lipslide is a 50-50’s more awkward cousin. Instead of popping straight onto the rail, you bring your skis over it and land sideways across it.
Here is the short answer. Ride in with decent speed and a wide stance, and as you pop, bring your knees up before you spin. That is what lifts your skis clear of the rail so you do not catch them on the way over. Land with your weight centred over the rail and on both skis, slide, and pop off as usual.
The knees-up-before-you-spin bit is the whole trick. Everything else you already know from riding rails straight.
Watch it first
Jake Lloyd rides it, filmed by FSBS, and the clip runs under two minutes.
Watch the order of his movements at the pop. Knees first, then rotation. It happens quickly and it is the thing to copy.
What you need first
A lipslide punishes a shaky rail game, so get the basics boring first.
- A solid 50-50 on skis, where getting on, holding it and getting off take no thought.
- Ideally a tail press too, because it teaches you to control the board’s balance point while you are already on the rail.
Start on a wide, low box rather than a thin round rail. A box gives you a margin for error that a rail does not.
Helmet on. This is the trick where people catch a ski and go down sideways on metal.
The steps
1. Ride in with speed and a wide stance
Ride up to the rail with a decent amount of speed and a nice wide stance.
Speed matters more here than on a straight 50-50. You are rotating as well as popping, and a slow approach gives you less time to get the skis over before you are past the start of the rail.
The wide stance is your stability once you land across the feature.
2. Pop, and bring your knees up before you spin
This is the step the trick lives or dies on.
Pop up onto the rail, and bring your knees up before you spin. Lifting the knees is what raises your skis clear of the rail so you do not catch them as you come across it.

Get this the wrong way round, spinning first and lifting second, and the tip or tail of a ski clips the rail while you are still rotating. That is the classic lipslide crash and it is why the order matters more than the height.
3. Land centred, on both skis
Land on the rail with your weight centred over the rail and on both skis.

Both skis is the part to concentrate on. Landing weighted onto one foot puts you off balance immediately, and on a rail there is nowhere to correct to.
Centred over the rail, not ahead of it or behind it. Same balance point as a 50-50, just approached sideways.
4. Slide, then pop off
From here it is a rail slide like any other. Hold your position, look at the end of the feature rather than at your feet, and pop off as usual at the end.
So why do I keep catching a ski?
Because you spun before you lifted.
That is the single most common cause and the video’s own advice addresses it directly. The knees come up first, then the rotation. If you think of it as one movement you will get it wrong; think of it as two in quick succession.
The other cause is arriving too slowly. Without enough speed you are still rotating when you reach the rail, so your skis are at exactly the angle most likely to catch.
If it keeps happening, go back to a wide box and a gentler approach angle until the sequence is automatic.
Where this sits
This is a step above a straight rail slide and a step below the switch version.
Below it: 50-50 on skis and tail presses. Above it: the switch lipslide, which is this trick starting backwards, and 270s onto a box.
Kinked rails are worth having too, because the leg-absorbing they teach makes every rail more forgiving.
Frequently Asked Questions
How do you lipslide on skis?
Ride in with decent speed and a wide stance, pop up onto the rail, and bring your knees up before you spin so your skis clear the rail. Land with your weight centred over the rail and on both skis, slide the length of it, and pop off at the end.
Why do I catch my skis on a lipslide?
Almost always because you rotated before you lifted your knees. The knees come up first, then the spin. Arriving too slowly causes it too, because you are still rotating as you reach the rail.
What is the difference between a lipslide and a boardslide on skis?
The direction you approach the rail from. A lipslide brings your skis over the rail before you land across it, which is why clearing them matters so much.
Should I learn lipslides on a box or a rail?
A box, and a wide low one. It gives you room to be slightly off and still stay on, which a thin round rail does not.
What should I be able to do before trying a lipslide?
A 50-50 that takes no thought at all, and ideally a tail press, because that teaches you to manage your balance point while already on the feature.
In short
Speed, wide stance, knees up, then spin. Land centred on both skis, look at the end, pop off.
If you are catching skis, you are spinning too early. It really is that specific.
Ask any questions in the comments below.




