How to Tail Press on Skis

First go

A tail press is riding a box or rail with your weight shifted back so only the tails of your skis are in contact and the tips are lifted. You get there by pushing your feet forwards and leaning back to counterbalance, then holding it steady until you pop off the end. It is the first bit of style you can add to a 50-50 and it is the gateway to the rest of the press family.

Watch it first

A short demo rather than a talking tutorial. Watch how far forward the feet go, and how little the upper body moves once the press is set.

Video by Fall Line. Go and have a look at the rest of their park tutorial series.

What you need first

You want the 50-50 to be comfortable before you try this. Not just possible, comfortable, because the press adds a balance problem on top of a trick you should not still be thinking about. If you are still concentrating on staying centred, adding a press will simply put you on the ground.

Same feature choice as before. Wide, low beginner box, and a helmet.

How to tail press, step by step

  1. Get on as you normally would. Straight run-in, steady speed, knees bent, weight centred. Nothing changes about the approach.
  2. Once you are on and settled, push your boots forwards. Not a jerk, a push. Your feet slide out ahead of you along the box.
  3. Lean back to counterbalance. This is the part that makes it work rather than making you fall over. The feet going forwards and the upper body going back cancel each other out, and you end up balanced on the tails with the tips off the surface.
  4. Hold it and stay square. Keep your skis in line with the box and your shoulders square to it. If you let the skis drift off that line you will catch an edge, and a caught edge in a press puts you down hard.
  5. Come back to centre, then pop off as usual. Bring your weight forward again before the end rather than trying to ride off still pressed.
Skier holding a tail press along a park box with the ski tips lifted clear of the surface
Feet pushed forward, weight back, tips clear of the box. The upper body stays square.

Common mistakes

  • Leaning back without pushing the feet forward. That is not a press, that is just falling backwards. The two movements have to happen together.
  • Pressing straight away. Get on, settle, then press. Trying to do both at once is how you end up off the side.
  • Letting the skis drift off the line of the box. The press reduces how much ski you have in contact, so there is far less margin before an edge catches.
  • Still being pressed at the end. Come back to centre before you pop off, or the landing sorts it out for you.

What should you learn next?

The tail press is the first thing most people add to a 50-50, and it opens up the rest of the box. From here, sliding the box sideways is the other direction to take it, and once you can ride switch you can start getting on and off backwards. If you have not got that yet, riding switch is worth a morning on its own. After that, the 270 on and the switch lipslide are where the box starts getting interesting.

Tail press FAQs

What is a tail press on skis?

Riding a box or rail with your weight shifted back so only the tails of your skis are touching and the tips are lifted clear. It is usually the first variation people add once they can ride a box straight.

Why do I fall backwards when I try to tail press?

Because you are leaning back without pushing your feet forward. The press is two movements that balance each other out. Push your boots forwards along the box and lean back to counter that, and the two cancel. Leaning back on its own just moves your weight behind your feet with nothing to hold it.

Do I need to be able to 50-50 before I tail press?

Yes, and comfortably rather than just occasionally. The press adds a balance task on top of the 50-50, so if you are still concentrating hard on staying centred you have nothing spare to give it.

Why do I keep catching an edge in a press?

A press puts far less ski in contact with the box, so there is much less margin for the skis drifting off the line of the feature. Keep your skis lined up with the box and your shoulders square to it, and come back to centre before you reach the end.

So, get your 50-50 boring first, then start adding a small press halfway along and build from there. Ask any questions in the comments below.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top