Cab 180 to 50-50 on a Snowboard (Riding in Switch, Landing Straight)

Intermediate

A cab 180 to 50-50 is a rail entry rather than a rail trick. You approach switch, spin a frontside 180, and land on the rail riding forwards in a normal 50-50.

Here is the short answer. Ride in switch. Pop a frontside 180, which from switch is a half-cab. Land straight on the rail and look at the end of it. Ride off.

Four steps, and three of them are things you already have. The one that takes the work is being genuinely comfortable riding switch into a feature.

Watch it first

Will Radula Scott rides it, filmed by Hemel Freestyle, and the clip runs just over two minutes.

Worth watching for how unhurried the entry is. The 180 is small and controlled, not thrown, and he is looking at the rail long before he reaches it.

Video by Hemel Freestyle, riding by Will Radula Scott.

A note on the name

Worth clearing up, because the terminology trips people up.

A cab, short for caballerial, means a trick started riding switch. So a cab 180 is a 180 begun switch, and because it is only half a rotation you will also hear it called a half-cab. Both names describe the same thing and the video uses both.

The important part for this trick is what it means practically: you start backwards and you finish forwards. That is why it works as a rail entry, because you end up in a normal 50-50 rather than a switch one.

What you need first

Three things, and the first is the real gate.

  • You can ride switch comfortably, including approaching a feature switch. Not “a bit on a green run”.
  • A solid 50-50 that you can hold without thinking.
  • A frontside 180 on snow that you can pop small and controlled rather than throwing.

Learn it on a wide, low box before a rail. Helmet on.

The steps

1. Ride in switch

Approach the feature riding switch.

This is the part to practise on its own. Riding switch on an open run is one thing; riding switch on a straight line at a metal rail is another, and it is worth doing several laps of just that before adding anything.

2. Pop a frontside 180 onto the rail

Pop a frontside 180, which from switch is your half-cab, and land on the feature.

Keep it small. You need exactly half a rotation and no more, and the usual mistake is throwing it hard enough for the board to keep turning past straight.

3. Land straight, and look at the end

Land straight on the rail, and look at the end of it.

That second part is the video’s own emphasis and it is what keeps you on. A rail is narrow, you have just arrived on it from a rotation, and your eyes are what stop you drifting off the side. Look at the end, not at your feet and not at the point you just landed on.

You are now in an ordinary forwards 50-50, so everything you know about holding one applies. Base flat, no edge, weight centred, body in line with the board.

4. Ride off

Ride off the end as you would from any 50-50.

So why do I keep spinning past straight?

Because you threw the 180.

From switch, a frontside 180 wants to keep going, and if you commit to it the way you would for a spin on snow, the board arrives at the rail already past square. On a rail, past square means off the side.

Pop it smaller than feels right. You are aiming to arrive straight, not to complete a spin.

The other cause is not being settled switch on the approach. If the run-in is a fight, the 180 is a lunge, and a lunge always over-rotates.

Where this sits

This is an intermediate rail entry rather than a rung of its own.

The foundation is the 50-50, which also covers 180s on and off the end. The rotation itself comes from 180s. Once this is comfortable, the backside 180 on to a switch 50-50 with a switch frontside 360 out is the harder version of the same idea.

Frequently Asked Questions

What is a cab 180 to 50-50?

A rail entry where you approach the feature riding switch, pop a frontside 180 onto it, and land riding forwards in a normal 50-50. Because it starts switch it is called a cab, or a half-cab since it is only half a rotation.

What does cab mean in snowboarding?

Short for caballerial. It means the trick is started riding switch. A cab 180 is a 180 begun switch, and you will hear the same trick called a half-cab.

Why do I over-rotate onto the rail?

Because you popped the 180 too hard. From switch a frontside 180 carries easily, so it needs to be smaller than feels natural. You are aiming to arrive straight on the rail, not to complete a spin in the air.

Where should I look on a cab 180 to 50-50?

At the end of the rail, as soon as you have landed on it. That is what keeps you tracking straight after arriving from a rotation.

What should I be able to do before trying this?

Ride switch comfortably, including straight at a feature, hold a 50-50 without thinking, and pop a small controlled frontside 180 on snow.

In short

Switch on the approach, small frontside 180 on, land straight, eyes on the end of the rail, ride off.

The trick is the switch approach and the restraint in the pop. Everything after landing is a 50-50 you already know.

Ask any questions in the comments below.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top