How to Hit a Hip on a Snowboard (The 45 Degrees You Do Not Have to Force)

Intermediate

A hip is a jump where the landing runs off at an angle to the take-off, so you have to turn slightly in the air to meet it. It looks like a spin trick and it really is not.

Here is the short answer. Ride in flat based and relaxed, pop exactly as you would off a straight jump, and point your front hand down towards the landing. That small movement turns you the 45 degrees or so that a hip needs. Land flat, then rock lightly onto your heel edge as you ride away.

You are not throwing a rotation. You are pointing at where you want to go and letting your body follow.

Watch it first

Snowboard Addiction is the source, and the clip is short and entirely about the frontside hip.

It is worth watching because a hip is one of those features that is much easier than it looks from the bottom, and seeing how little the rider actually does is the fastest way to believe that.

Video by Snowboard Addiction.

Lining up before you drop

Most of a good hip hit happens before you leave the ground.

Line up your approach by looking down the coping of the landing. The coping is the top edge of the landing, and looking along it rather than at the take-off is what points you at the right part of the feature.

Keep enough speed to make it off the top of the lip, ride in flat based, and keep a relaxed stance. Tension here is what makes people over-rotate later.

The steps

1. Pop as you would off a straight jump

Nothing clever. Extend with both legs, the same pop you would use on a normal kicker.

The temptation on a hip is to do something different because the landing is off to one side. Resist it. The pop is ordinary; the direction comes next.

2. Point your front hand at the landing

This is the whole trick.

While you are in the air, point your front hand down towards the landing.

That initiates a slight rotation of your body and the board. You are not forcing a spin, you are aiming, and the rotation follows the aim.

3. Let it come round about 45 degrees

On most hips you will rotate roughly 45 degrees, give or take, depending on the feature.

The target is not a number though. The idea is to match your board and body position to the direction of the landing. Some hips need more, some less. Point at the landing and you get what that particular hip needs.

4. Land flat, then rock onto your heels

You can land either with a flat base or slightly on your heel edge, but there is a better version.

Land flat, then rock lightly onto your heel edge as you ride away down the landing.

The reason is worth knowing. Landing with a flat base spreads the impact over a larger surface area, so it absorbs better. Arriving already on an edge concentrates it, and on a steep angled landing that is how you wash out.

So why am I over-rotating on hips?

Usually because you treated it as a spin.

If you wind up your shoulders on the approach, or throw the rotation off the lip the way you would for a 180, you will carry far more than the 45 degrees a hip wants and land across the landing rather than down it.

The fix is the relaxed stance on the run-in and the hand pointing at the landing instead of a shoulder turn. Aim, do not throw.

The other common one is not enough speed to clear the top of the lip, which drops you into the flat between take-off and landing. That is the part of a hip that actually hurts, so err towards more speed rather than less.

Where this sits

A hip is a good next step once straight airs are comfortable, because it teaches you to control direction in the air without committing to a full rotation.

Below it: the basics of riding a park, which terrain park etiquette covers, and a solid 50-50 if you are working through the park generally. Above it: 180s and then 360s, 540s and 720s, where you do throw the rotation properly.

Frequently Asked Questions

How do you hit a hip on a snowboard?

Line up by looking down the coping of the landing, ride in flat based and relaxed with enough speed to clear the top of the lip, and pop with both legs as you would on a straight jump. Point your front hand down at the landing to start a slight rotation, then land flat and rock onto your heel edge.

How much do you rotate on a hip?

Roughly 45 degrees on most hips, give or take. The number matters less than the principle, which is to match your board and body to the direction the landing runs.

Why do I over-rotate on a hip?

Because you are throwing it like a spin. Winding up your shoulders or forcing the rotation off the lip carries far more than a hip needs. Point your front hand at the landing instead and let the rotation follow.

Should you land a hip flat or on an edge?

Flat, then rock lightly onto your heel edge as you ride away. A flat base spreads the landing over a larger surface area, which absorbs it better than arriving already on an edge.

What is the coping on a hip?

The top edge of the landing. Looking along it as you approach is what lines you up with the right part of the feature.

In short

Look down the coping, ride in flat and relaxed with enough speed, pop normally, point your front hand at the landing, land flat and rock onto your heels.

A hip is an aiming trick, not a spinning trick. Once that clicks it becomes one of the most enjoyable features in the park.

Ask any questions in the comments below.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top